shengya-audio







PSD-350T Class a Stereo Power Amplifier
PSD-350T Class a Stereo Power Amplifier
Class a Stereo Power Amplifier

Frequency response: 20Hz-20kHz±0.5dB

Rated output power: 350W+350W(8Ω)

Class A output power: 30W+30W(8Ω) 

Harmonic distortion: ≤0.1% (1kHz 1W)

Input sensitivity: 1.2V

Signal to noise ratio: 90dB (wideband)

Input impedance: 47kΩ

Dimensions (width x height x depth): 446 x 216 x 531 (mm) 

Weight: 36kg



• Adopt independent dual-channel balanced transmission amplifier structure, effectively eliminate dynamic crosstalk interference problems;

• The audio signal input circuit is composed of field effect transistors for cascode differential amplification, and famous transistors for differential voltage amplification;

• The final stage is composed of 24 high-power transistors to form a powerful power output stage, which can easily drive speakers with an impedance as low as 2 ohms;

• The power supply part is composed of a 1500W toroidal transformer and a 120,000 microfarad audio special electrolytic capacitor;

• Class A output within 20W, automatically switch to Class A and B output when it exceeds 20W;

• Added balanced and unbalanced signal input options, and can connect two preamplifiers with different tones;

• The output state of Class A or Class A and B can be set, which is convenient for fine-tuning the tone and can also save power consumption and greatly reduce the heat of the chassis.

• The blue LOGO luminous font is added to the panel, which has a very high fashion and ornamental performance.


Details


公众
账号